Stairrobot

AATA International

Handling

Stair-Robot® Professional control

 

Loadmethod

Option 1

  • Place StairRobot flat on the floor next to the load
  • Place the load on the platform of the Stair-Robot
  • Put the load on the platform
  • Lift Stair-Robot from the ground and let the support wheel bags

Option 2

  • Place the Stair-Robot standing for the charge
  • Slide the Stair-Robot under the load
  • Put the load on the platform
  • Unlock the support wheel and wheel support move
  • down until it locks
  • Place one foot on the support wheel and the tilt
  • Stair-Robot on its three wheels

Klimb

  • Tilt the Stair-Robot in an upright position
  • Unlock the support wheel; wheel pops up and locks

Warning! if you fold the support wheel, you have to make sure you're keeping distance.

  • Duw the Stair-Robot met lading naar de voet van de trap
  • Blokkeer de twee vaste wielen met de rem
  • Trek /kantel de Stair-Robot op de trap en gebruik de bedieningsschakelaar om de machine omhoog te rijden

Landing

Option 1

  • Push the Stair-Robot with cargo to the foot of the stairs
  • Block the two fixed wheels with the brake
  • Pull / tilt the Stair-Robot on the stairs and use the control switch the machine up to drive

Option 2

  • Drive the Stair-Robot to the top until the tipping and
  • unlock the support wheel
  • Start the upward movement again and use you're foot
  • to support the wheel on the ground.
  • Drive the Stair-Robot over the top and lock the wheel support

Option 3

  • Drive the Stair-Robot until its tipping moment
  • Pull/Balance the Stair-robot forward and land the Stair-Robot on the dolly.
  • Drive the Stair-Robot further on the dolly and use the dolly to maneuver

Descend

  • Push the loaded Stair-Robot towards upstairs until the tracks are getting grip on the top steps.
  • Unlock the supper wheel, The wheel will pop up and it locks itself.
    Warning! if you fold the support wheel, you have to make sure you're keeping distance
  • Drive the Stair-Robot down until the two wheels touch the floor.
  • Use the control switch to drive the Stair-Robot upstairs and simultaneously tilt tilt the machine in an upright position

Unload

  • The load area needs to be secured Before loading,
  • Place Stair-Robot in an upright position or place the Stair-Robot on its tracks
  • Remove the pull straps
  • Remove the load of the machine or pull in the Stair-Robot cargo from